Skip to content

SG-FORGE EURCV Integration for Firms That Hold and Redeem EURCV and USDCV

SG-FORGE issues and redeems EURCV and USDCV and can freeze holder addresses. The firm that holds the tokens runs onboarding, redemption tracking and booking. Protofire builds that side, with contract-event monitors on each chain. The Safe Foundation names Protofire among the independent teams that operated a Safe{Wallet} instance.

Luis Medeiros

Reviewed by Luis Medeiros, Field CTO at ProtofireLast reviewed: November 2026

On this page
  1. Overview
  2. Redemption timing
  3. What you get
  4. Ethereum contract
  5. Controls by chain
  6. SG-FORGE facts
  7. Why Protofire
  8. From onboarding to launch
  9. How work starts
  10. Not the right fit
  11. Related guides and services
  12. FAQ

Work shipped for 60+ networks and 95+ protocols, including

  • Chainlink
  • Ethereum
  • Solana
  • Safe
  • Ripple
  • Aave

What SG-FORGE does for EURCV holders and what it leaves to them

SG-FORGE issues the tokens, and the holding firm runs its own side. SG-FORGE, a subsidiary of Société Générale, issues EUR CoinVertible (EURCV) and USD CoinVertible (USDCV) as e-money tokens. It verifies each subscriber before minting, redeems tokens and can freeze addresses. An SG-FORGE EURCV integration covers the holder's part, from onboarding data to booking. Protofire builds and connects that part.

The holder's systems work from documents and chain data. SG-FORGE's white paper sets out subscription by agreed amounts and redemption by email. The Ethereum contract has verified source code, and Solana, the XRPL and Stellar show the issuer's controls in chain state. Protofire builds from those public sources.

How an EURCV holder's systems connect to SG-FORGE and the chains

SG-FORGE runs issuance, redemption and the token contracts. The firm's staff approve each outbound transfer.

Your firm

Onboarding record and approvers

The firm keeps the KYC file, its wallet addresses and the staff who approve transfers.

Ledger and treasury

The ledger holds positions, and treasury forecasts cash from pending redemptions.
SG-FORGE

Issuance and redemption

SG-FORGE checks each Valid Purchaser, mints against agreed funds and pays redemptions.

Token contracts and collateral

The registrar controls freezes and pauses, and SG-FORGE tests the collateral each business day.
Protofire builds

Chain readers and posting rules

Services read each network's token events and book each one once.

Redemption tracker and daily match

A tracker follows each request to payout, and a daily job matches the ledger to the chains.

EURCV redemption pays out by the end of the following month

An EURCV redemption can take until the last business day of the month after SG-FORGE's controls pass.Holders resident in the EEA send their request to SG-FORGE by email. SG-FORGE confirms receipt within five business days, then runs KYC/AML and sanctions controls. It may also ask for the tokens to be transferred to it. Payout comes "at the latest on the last Business Day of the month following the month the controls were successfully completed" (white paper). If the controls fail, the tokens are returned to the holder's wallet.

For example, controls that finish on 3 March allow a payout as late as the last business day of April. Until then, treasury forecasts the cash and the ledger shows the redemption as pending. Under the white paper, when a recovery plan option is triggered, redemption can also become subject to liquidity fees, a daily limit or a suspension.

MiCA gives holders of an e-money token a claim on the issuer and redemption at par value (Article 49). Your counsel decides how these terms apply to your clients.

In order to simply serve these regions, we need to have every single aspect of the app to be MiCA compliant, including the stablecoins.
Alex Radu, CEO & Founder, Pulsar Money · The Protocol Roundtable by Protofire, Episode 6, 27:16

Holder systems Protofire builds for an SG-FORGE EURCV integration

Protofire builds six services around SG-FORGE's process and its token contracts.

A register of your verified entity and its addresses

SG-FORGE subscribes only a "Valid Purchaser" that it has verified under KYC/AML and sanctions rules (white paper). Your compliance team supplies the file that SG-FORGE checks. Protofire builds the register of your approved addresses per chain and of the staff who approve transfers from them.

Each mint matched to the agreed amount and the payment

Finance sees each new position tied to its subscription. EURCV payments go to a segregated account that SG-FORGE names. USDCV payments go first to an account in SG-FORGE's name (USDCV white paper). Protofire's matcher pairs each mint, or each transfer from SG-FORGE's address, with its subscription.

Redemptions tracked from the email to the payout

Treasury sees each open redemption with its receipt deadline and latest payout date. Protofire's tracker records the request, any token transfer to SG-FORGE and tokens returned after failed controls. The payout closes the pending entry.

Outbound transfers held while the contract blocks them

Your payment service holds outbound EURCV while the registrar has paused the Ethereum contract or frozen the sender or recipient. The contract would reject those transfers. Protofire's monitors keep the frozen list from the contract's events. Your staff release held transfers.

One ledger for EURCV and USDCV across chains

Your ledger shows one position per client and token, with the chain on each entry. The white paper makes new EURCV fungible with existing EURCV "irrespective of the blockchain used". On chain, both tokens have 18 decimals on Ethereum and 2 on Solana, and Protofire's posting rules convert both.

A daily match and SG-FORGE's collateral test in your reports

Finance sees at each daily cut-off whether ledger balances match the chains. SG-FORGE publishes each collateral test result the next business day. Protofire builds the match and routes each publication and each SG-FORGE notice to a named owner.

What the registrar can do in the Ethereum contract

On Ethereum, one registrar address mints, freezes and pauses both tokens.EURCV and USDCV are proxies to one SmartCoin implementation, version "V4", with verified source code. The code lets the registrar:

  • Mint to an address that is not frozen, and burn tokens from its own balance.
  • Freeze and unfreeze addresses, and burn the whole balance of a frozen address (wipeFrozenAddress).
  • Pause and unpause the contract.
  • Add and remove redemption addresses.
  • Authorize a new implementation, and a separate technical address then performs the upgrade.

A transfer to a redemption address goes to the registrar instead, and the contract emits RedemptionStarted with the redemption address. The Transfer event names the registrar as recipient. Protofire's posting rules key each entry on transaction hash and log index and book a redemption once, from RedemptionStarted. A wipe appears as a Transfer to the zero address that the holder did not sign.

The white paper adds that holders "agree that the Issuer has the authority to blacklist certain addresses". If a holder receives EURCV from a blacklisted address, SG-FORGE "has the right to freeze the corresponding EURCV". The holder may then lose the ability to redeem those tokens. So your firm screens each counterparty before accepting EURCV from it.

Issuer controls and holder setup differ on each chain

SG-FORGE uses each chain's own issuer controls, so the holder's setup differs by chain.On Canton, the white paper names the CIP-56 token standard and a third-party platform for mint and burn.

Token form

Ethereum: ERC-20 behind an upgradeable proxy, 18 decimals.

Solana: Token-2022 mint, 2 decimals.

XRPL and Stellar: XRPL: an issued token on a trust line. Stellar: an asset with a Soroban asset contract.

Issuer controls

Ethereum: The registrar mints, freezes, wipes and pauses (verified code).

Solana: One key, labelled "registrar" in the metadata, is mint authority, freeze authority and permanent delegate.

XRPL and Stellar: XRPL: trust-line clawback enabled. Stellar: authorization required and revocable, with clawback enabled.

Holder setup

Ethereum: No approval is needed.

Solana: A token account for the mint.

XRPL and Stellar: XRPL: the holder opens a trust line. Stellar: the issuer authorizes each trustline.

Events to watch

Ethereum: Freezes, wipes, pauses, redemption-list changes and upgrades.

Solana: Frozen accounts, and moves or burns by the permanent delegate.

XRPL and Stellar: Clawbacks, and revoked authorizations on Stellar.

Where SG-FORGE is registered and where the collateral is held

Issuer
Société Générale - FORGE, a Société Générale subsidiary in Puteaux, France (LEI 969500FX8K40ZDW4F377).
ACPR register
The ACPR's REGAFI register lists Société Générale - Forge under two authorizations ("Agrément"). The first is "Entreprise d'Investissement" (investment firm), from 3 March 2021.
E-money authorization
REGAFI lists the "Établissement de Monnaie Électronique" (e-money institution) authorization from 1 July 2024. The white paper gives the same date.
MiCA white papers
ESMA's interim MiCA register lists the EURCV and USDCV white papers under the ACPR. SG-FORGE gives both as version 2.2, published on 30 September 2026.
MiCA services
ESMA's register lists Société Générale - FORGE as a crypto-asset service provider under the AMF, dated 23 October 2025. Its services are custody and administration, execution of orders and transfer services.
Networks
EURCV: Ethereum, Solana, XRPL, Stellar and Canton. USDCV: Ethereum, Solana and Canton.
Ethereum contracts
EURCV 0x5F7827FDeb7c20b443265Fc2F40845B715385Ff2 and USDCV 0x5422374B27757da72d5265cC745ea906E0446634, both proxies to one implementation.
Collateral
The white papers place EURCV collateral in a segregated account at Société Générale. They place USDCV collateral in segregated accounts at The Bank of New York Mellon SA/NV and Société Générale.
Collateral test
Each business day SG-FORGE tests that the collateral is worth at least the tokens outstanding, with at least 30% in cash. SG-FORGE publishes the result the next business day.

We read these facts on 17 November 2026 in the white papers, ESMA's and the ACPR's registers and the verified contract source.

Our record: a Safe{Wallet} instance for multisig approval wallets

The Safe Foundation names Protofire, at app.safe.protofire.io, among the independent teams that operated an instance of the Safe{Wallet} interface.The statement is in the Foundation's blog post of 15 October 2025.

An EURCV holder on Ethereum can keep its tokens in a Safe. Its owners then confirm each outbound or redemption transfer. Protofire's Safe multisig deployment page describes our wallet work in full.

How the build goes from SG-FORGE onboarding to the first redemption

  1. Step 1

    Your firm completes SG-FORGE's onboarding

    Your compliance team completes the Valid Purchaser onboarding, and your firm picks its chains and wallets. A Protofire engineer then maps each event to a posting in your ledger.
  2. Step 2

    Protofire builds against your own transfers

    Protofire builds the chain readers, posting rules and tracker. Your staff send small transfers between your own addresses on each chain. Each transfer must produce one ledger entry.
  3. Step 3

    The first subscription and redemption run through the services

    Your first live subscription runs through the matcher, and your first redemption through the tracker. Finance checks each entry against the payment and the payout.
  4. Step 4

    Your firm owns the services and runs them

    Deployment runs from your firm's own accounts and keys, and the code and runbooks are yours. After launch, Protofire holds no key, signer or admin role, and no client funds or tokens. A service your firm owns sends each transfer after your firm's own approval.

How an SG-FORGE project with Protofire starts

Send your SG-FORGE onboarding status, the chains and wallets you will use, and the ledger that the bookings must reach.The services Protofire builds read public chain data and your firm's own records. Where Protofire runs a service as managed onchain operations, a written scope lists each write call it makes.

Proposal
In writing, one business day after the discovery call: findings, a plan in phases and the first step we recommend.
Price
Fixed per phase when you commission it, against written acceptance criteria. Overruns inside them are ours to absorb, invoices follow delivered milestones, and you can stop at any phase boundary. Anything we operate after launch is priced in the proposal as its own recurring line, with the notice to end it.
Ownership
Code we write for you, contracts, the keys and credentials this work creates and the accounts your infrastructure runs in are yours by contract, within the license of any third-party software involved. Keys that a custody platform or a staking provider holds under its own key model stay with it under your contract; every other custody key stays with you or the custodian you appoint. Where the scope places something on servers we rent, it says what moves to you and when. An NDA is available from your first message, and we sign a data processing agreement (DPA) together with it.
After launch
Delivery closes with a hypercare window and a defect warranty, with their terms written into the proposal. A service we operate continues under its written scope until that scope ends.
Access
Read-only by default. A role that can start requests only if your written scope names one; never a signer, approver, administrator, key holder or recovery role on your contracts, wallets or custody platform. Services we build call each platform on credentials your staff issue and keep in your vault. Anything that approves or moves funds runs in your environment, and a scope under which we operate a service lists every write call it makes. Where the scope has us operate nodes, validators, monitors, explorers or indexers, it names the role and any key we hold on those servers, and in your own cloud account you can remove it.
Licenses
Protofire is an engineering firm and holds no financial or crypto-asset license; licensed activity stays with you and your providers.

How we work shows a worked proposal.

When an exchange account or another issuer fits better

Some firms that use EURCV need a smaller build or a different one.

  • You only trade EURCV on an exchange and do not withdraw it. The exchange's own systems cover that use.
  • You want to issue a euro token of your own. Our stablecoin development page covers the issuer's side.
  • Your customers need euro IBANs linked to their wallets. Our wallet-linked IBAN accounts page covers that model.
  • Your clients are resident outside the EEA and expect to redeem with SG-FORGE. The white paper says non-EEA holders "do not benefit from a direct right of redemption".

SG-FORGE onboards your firm directly, and your firm is the Valid Purchaser. Protofire holds no license and gives no legal opinion on MiCA or on the white paper.

FAQ

What is an SG-FORGE EURCV integration?
An SG-FORGE EURCV integration connects a firm's wallets, ledger and treasury to the EURCV and USDCV tokens that SG-FORGE issues. It matches each mint to its subscription and tracks each redemption to payout. It also watches the issuer's controls on each chain. Protofire builds these services for firms that hold and redeem the tokens.
Who can build an EURCV or USDCV integration for a bank or broker?
Protofire builds the holder's side of an EURCV or USDCV integration for banks, brokers and other firms. SG-FORGE onboards the firm as a Valid Purchaser, then mints and redeems. The firm's staff keep their approvals.
Do we need SG-FORGE's approval to hold EURCV?
On Ethereum, an address needs no approval to hold or receive EURCV. SG-FORGE's release on the change of 1 July 2024 describes "free transferability without whitelisting restrictions" (SG-FORGE). A frozen address still cannot send or receive. On Stellar, the issuer authorizes each trustline before an account can hold EURCV.
What happens to EURCV transfers while the Ethereum contract is paused?
In the verified code, a pause makes transfers and approvals revert, and it also stops mints and burns. The registrar can still freeze, unfreeze and wipe addresses and edit the redemption list. Your payment service holds outbound transfers until the contract emits UnPaused.
Can SG-FORGE redeem EURCV early, and how would holders hear of it?
Yes. The white paper lets SG-FORGE redeem all outstanding EURCV with at least 90 days' notice. After a tax, regulatory or force majeure event, it may redeem by the business day after the 90th calendar day from its notice. Email notices are deemed given on the fourth business day after mailing. Notices on SG-FORGE's website are deemed given on the tenth business day after publication.

Get a proposal

Tell us what you are building. An engineer reads it, we have a short call, and the written proposal follows within one business day.

Luis MedeirosField CTO, reads every request · LinkedIn

A demo or repository link also works.